溶剂去除速度对于溶剂退火薄膜相形貌的影响

以聚苯乙烯-聚4-乙烯基吡啶(PS-b-P4VP)嵌段共聚物作为研究对象,采用DMF作为退火溶剂,以原子力显微镜(AFM)和透射电子显微镜(TEM)为表征手段,研究了溶剂退火后期溶胀薄膜中溶剂的去除速度对于薄膜相形貌的影响,发现通过改变溶剂去除速度可以有效的调控薄膜中的形貌.当薄膜厚度为35 nm时,DMF的快速挥发会导致薄膜中形成以PS为分散相的反转柱状相结构,当降低溶剂的挥发速度时,薄膜中形成了以PS为分散相的环状形貌,当进一步减缓挥发速度时,薄膜中将形成台阶状的片层结构;然而当薄膜厚度为55 nm时,溶剂退火后期薄膜中形成的是以P4VP为分散相的正常柱状相结构,在相同溶剂去除速度条件下薄膜相形貌变化较小.     

Synthesis by FVT and Characterization of Unhindered Silanethiones

The retro-ene reaction of allylthio- and propargylthiosilanes led, under flash vacuum thermolysis (FVT) conditions, to unhindered silanethiones, characterized by their derivatives, and also directly by coupling of the FVT with gas-phase spectrometries. Monomeric silicon oxysulfide has been generated similarly. The unsubstituted silanethione was not obtained, but dehydrogenated into silicon monosulfide during FVT.     

Study on 172‐nm vacuum ultraviolet light surface modifications of polydimethylsiloxane for micro/nanofluidic applications

In this study, we developed a technique for modifying the surface of the silicone elastomer Poly(dimethylsiloxane) (PDMS) by 172‐nm wavelength vacuum ultraviolet (VUV) light exposure. Such materials have high potential for application to micro/nanofluidic devices if their surface properties can be adequately controlled. The hydrophilicity, zeta potential and bonding strength of the VUV‐exposed surfaces were investigated and compared to surfaces exposed to conventional vacuum oxygen plasma. It was found that the proposed technique was effective at modifying the surface conditions from hydrophobic to hydrophilic, increasing the zeta potential, and allowing good bonding to glass. The time required to produce the maximum bonding strength was found to be similar to that for vacuum oxygen plasma exposure. However, since VUV exposure does not require the creation of a vacuum, it offers a faster turnaround, making it suitable for mass production. Copyright © 2010 John Wiley & Sons, Ltd.     

Automated RNA tertiary structure prediction from secondary structure and low‐resolution restraints

A novel protocol for all‐atom RNA tertiary structure prediction is presented that uses restrained molecular mechanics and simulated annealing. The restraints are from secondary structure, covariation analysis, coaxial stacking predictions for helices in junctions, and, when available, cross‐linking data. Results are demonstrated on the Alu domain of the mammalian signal recognition particle RNA, the Saccharomyces cerevisiae phenylalanine tRNA, the hammerhead ribozyme, the hepatitis C virus internal ribosomal entry site, and the P4–P6 domain of the Tetrahymena thermophila group I intron. The predicted structure is selected from a pool of decoy structures with a score that maximizes radius of gyration and base–base contacts, which was empirically found to select higher quality decoys. This simple ab initio approach is sufficient to make good predictions of the structure of RNAs compared to current crystal structures using both root mean square deviation and the accuracy of base–base contacts. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011     

Recent developments in synchrotron vacuum ultraviolet photoionization coupled to mass spectrometry

In recent years, increasing attention has been paid to “soft” photoionization (PI), which will potentially become a standard, universal ionization method. Tunable synchrotron vacuum ultraviolet (SVUV) light, a quasi-continuous light with good energy resolution and high photon flux, has proved an ideal source for “soft” PI in various research fields (e.g., combustion chemistry and molecular imaging).This review focuses on combinations of SVUV light with commonly used techniques (e.g., molecular-beam sampling, laser desorption, ion desorption, and thermal vaporization). These couplings have successful applications in flame chemistry, organic analysis, chemical imaging and aerosol mass spectrometry.     

Synthesis of 2‐Arylbenzoxazoles from Flash Vacuum Pyrolysis of 2‐Methoxy‐N‐(arenylidene)anilines

Flash vacuum pyrolysis of 2‐methoxy‐N‐(arenylidene)anilines 2a‐g at 700 °C and 1 × 10^‐2 Torr gave the corresponding 2‐arylbenzoxazoles 1a‐g .     

超声浸渍对费托合成Co/Zr/SiO2催化剂性能的影响

采用超声浸渍法制备了费托合成Co/Zr/SiO2催化剂,考察了超声波功率对催化剂费托反应性能的影响,并运用N2物理吸附、X射线衍射、H2程序升温脱附、H2程序升温还原和透射电子显微镜对催化剂进行了表征,结果表明,超声波处理可以增大催化剂的比表面积,减小金属Co的粒径,并使其较为均匀地分散于载体表面,其中以高功率超声波作...     

Study on tribological behaviors of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites via a d‐optimal mixture design

This study analyzed variations of tribological behaviors that depend on the injection molding techniques during the blending of short glass fiber (SGF) and polytetrafluoroethylene (PTFE) reinforced polycarbonate (PC) composites. The proposed planning of blending experiments is to use a D‐optimal mixture design (DMD). The tribological behaviors of friction coefficient and wear mass loss were selected for discussion. Nine experimental runs, based on a DMD method, utilized to train the back‐propagation neural network (BPNN) and then the simulated annealing algorithm (SAA) approach is applied to search for an optimal mixture ratio setting. In addition, the result of BPNN integrating SAA was also compared with response surface methodology (RSM) approach. The results of confirmation experiment show that DMD, RSM, and BPNN integrating SAA method are effective tools for the optimization of reinforced process. Furthermore, the scanning electron microscope (SEM) images show that the abundant debris are peeled off from the matrix materials and predominant delamination mechanisms and plastic deformation are shown on the worn surface after tribological behavior tests. Copyright © 2010 John Wiley & Sons, Ltd.     

应用于活性负离子聚合的高真空实验技术研究与改进

高真空实验技术在装置设计、加工制作以及操作实施方面需要实验人员具备熟练的玻璃烧接技术;细颈的制作及反应装置的退火处理是较为关键的操作;考虑到聚合反应装置的体积较大,对火封操作进行了设计改进,使其能够应用于位置固定的装置;对操作中频繁采用的易碎封口安瓿进行了设计改进,使实验操作更为便利;针对已封闭装置预留的细颈部位,设计...     

热处理对La0.63Gd0.2Mg0.17Ni3.1Co0.3Al0.1储氢合金微观组织和电化学性能的影响

在氩气气氛和1173 K保温条件下对La0.63 Gd0.2 Mg0.17Ni3.1 Co0.3 Al0.1储氢合金进行不同时间(t=8 ～168 h)的热处理,采用电感耦合等离子发射光谱(ICP)、X射线衍射(XRD)、电子探针显微分析方法(EPMA)和电化学测试分析方法对比研究了退火时间对合金显微组织演化和电化学性能的影响.研究结果表明,铸态合金组织由Ce2 Ni7型、Gd2Co7型、Pr5 Co19型、PuNi3型和CaCu5型相组成,其Ce2 Ni7型相的丰度为78.9％,随退火时间的延长,退火合金中Ce2 Ni7型相的丰度逐渐增加,当退火时间t=168 h时其相丰度达到94.5％,Ce2 Ni7型相结构的晶胞参数和晶胞体积随退火时间增加而减小.电化学测试分析表明,退火合金电极的电化学性能与Ce2 Ni7型相的丰度有密切关系,退火时间对合金电极的活化性能影响不大,但合金电极放电容量随退火时间的延长逐渐提高,当t=168 h时,合金电极放电容量达到最大值386.8mAh·g-1;退火时间对合金电极循环稳定性的提高和改善有不同程度的影响,当退火时间t=16～168 h时,经100次充放电循环后,其电极容量保持率S100=90.3％～91.5％.热处理能有效改善合金电极电化学反应的动力学性能,但不同退火时间对合金电极的高倍率放电性能影响不明显.